Report item
Item specifics
  • wirless Modem Type: EDGE
  • Products Status: Stock
  • Type: Wireless
  • Brand Name: Antecheng
  • Package: Yes
  • Transmission Rate: 14.4Kbps
  • Style: External
  • Model Number: ATC600A00
  • Interface Type: RS232/ RS485
  • COLOR: black
  • Frequency: 850/900/1800/1900MHz
  • Place of Origin: Guangdong, China (Mainland)
  • is_customized: Yes
  • warranty: 1year
  • gsm: Yes
  • Interface Type: RS232 Single port
Product Description

GSM SMS Relay Switch  GSM SMS Controller Alarm, GSM Water Leak Alarm

The ATC RTU GSM/GPRS/EDGE Remote Monitoring& Remote Control System is a complete Remote Telemetry unit. It contains a GSM/GPRS/EDGE Modem and
control circuitry. It is capable of controlling Relay outputs and monitor Digital inputs and  Analogue inputs.(Analogue input support: Detect Water leaks,
Monitoring Temperatures for out-of-range conditions, Monitor Humidity for Damaging High Humidity Levels and monitor fuel levels).

The ATC RTU GSM/GPRS/EDGE Remote Monitor &Remote Control System is operated by the sending of SMS and GPRS/EDGE. The GSM/GPRS/EDGE controller
can be used as a remote telemetry system; users can directly control the output relays from a simple text message or GPRS. The controller can also be used as a
remote monitoring system; the unit can automatically notify the user whenever the any inputs change state and inputs counter.
The ATC RTU is complete with extend function include DI/DO/AI by UART2, support back up battery and built-in Quad-Band Modem -900/1800/850/1900.

Parameter item Reference scope
DC Power supply 9-28V DC (Standard adapter: DC 12V/1.5A)
Power consumption 12V input Max. 150mA/Average 50mA
Frequency range Dual-frequency 900/1800/850/1900
SIM Card Supporting 3V SIM Card
Antenna 50 Ω SMA Antenna interface
Serial RS232/rs485
Temperature range -30° C ~ +80 ° C
Humidity range Relative humidity 95%
Digital Input 2 digital inputs(Dry contact)
Outputdrivable relay outputs(open-collector outputs)
Output drive voltage Equal to input DC voltage
Output drive power Drive voltage ≤ 35V, drive current ≤ 500mA
Analog Input  analog inputs(4~20mA or 0~5V)
Audio interface 3.5mm audio in and audio out
Exterior dimension 130× 80× 25mm
Weight 400 g




Shopping Guide:

Warranty :One year

After -sell service : technician support

Packing :white paper box

Standard package : power supplier x 1 ,RS232 cable x1 .GSM antenna x1 .connecting port x1

Option :GPS antenna Internal .Gps Module .Internal battery . Temperature sensor .humidity sensor .smoke sensor .Led Screen ,gas sensor (payment another)


Features :

1)    Monitors up to Digital inputs &Analogue inputs
2)    Remote control outputs for switching applications
3)    Fast and easy installation
4)    Low set up and running costs
5)    No field programming required as it can be done by SMS
6)    Able to work in GMS mode/GPRS mode/EDGE mode
7)    Programmable low/high alarm points for each analogue input
8)    Works with 4 - 20mA(default)/1-5V based transducer
9)    Accept other kind of transducer - temperature /motion transducer etc.

10)  Reports on set point alarms and other triggers
11)  Up to 10 alarm time set point
12)  Support for get GPS location

13 ) support 10 owner mobile number

14) ATC RTU is a versatile SMS alert device suited for most monitoring needs. It is
   simple to use yet is packed with powerful functionalities to meet a wide ranging
   industrial and commercial and residential applications
   Standalone Operation
   It is very easy to setup, install and use. User can set parameter by Remote or
   Local mode. We can provide local configure tool and Remote configure command     

   for SMS


15) Digital Inputs

Most equipment today does provide some form of alerting signal to interface to\\monitoring devices from reporting of various

malfunction or abnormalities. There are various kinds of signal that the equipment can send out, most common of which are

opening or closures of one or more switch relay contact.UPS usually provide signals such as incoming power fail, battery mode,

battery level low, and switch over failure. An air conditioner system may provide signals such as system on/off,compressor over

temperature, low gas pressures, etc.


Equipments to be monitored are connected to ATC RTU using these alarm signaling contacts. ATC RTU keeps a constant watch

over all the contacts. Whenever any contact input changes status (either from a close to open or from an open state to close state)

it is captured by ATC RTU. It will then process the input according to the configuration provided by the user before. The correct SMS

messages will be sent to 5 mobile phone users.


ATC RTU is so fast in capturing the change of status of any signaling contacts that no event will be missed out up to 2 inputs can be

monitored directly. The flexibility of ATC RTU is in allowing remote query of input status and input counter using SMS.


To change contacting mobile phone number is also very easy. Authorize personal remotely using SMS command to add, change or

delete mobile phone  number in ATC RTU.


16) Analog Inputs

ATC RTU has  analogue inputs that can be configured to measure a 4-20mA or 1-5VDC signal. It will generate reports

when the monitored signal reached to programmable set points.

Two programmable set points can be programmed for each analogue input.When the monitored signal crosses a set point a specified

action will be performed like switching the output relay or sending an SMS report.


17) Digital Outputs

Besides monitoring inputs and act upon such inputs it also allow mobile phone users to compose SMS

messages to it. When ATC RTU receives any SMS, it will looks its memory bank to see what it is supposed to do and action according .

No action SMS are ignored.


Up to  relays can turned on and off by messages received from mobile phone. Querying Inputs and Outputs Status and Analogue Value


Authorized groups can also query the status of all input or output. This is very useful feature to determine the present status and value of

all inputs or outputs. The enquirer need not wait for an alarm to happen in order to receive the given I/O  status.


18)Turning On/Off Device Remotely

Authorized users can send a SMS command to trigger on or off the digital output.Upon receiving the command, ATC RTU will perform the

instructed action. After the on or off action is done, it will send a reply to the querying mobile phone as an acknowledgement.
There are 2 digital outputs that can be independently or meanwhile controlled.


19) Remote Editing of Mobile Phone Numbers

ATC RTU has a feature to allow user to remotely add, change or delete any mobile phone numbers in ATC RTU memory.


Re-assigning of operation personnel, a change of mobile phone number is also common. Rather than having to physically go to the installation

site with notebook computer, the authorized personnel can perform the change from anywhere using mobile phone. Where there are many

installed sites, this feature saves time and afford


For safe, ATC RTU have a supper mobile phone number set. It can change all parameter and query all parameter. Authorized user can to query

the parameter and  receive the alarm.








Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 28cm x 15cm x 8cm (11.02in x 5.91in x 3.15in)
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: piece
  • Package Weight: 2.0kg (4.41lb.)
  • Package Size: 28cm x 15cm x 8cm (11.02in x 5.91in x 3.15in)
We support the following payment methods. All payments made on AliExpress are processed by Alipay.